LED Lighting Installation

Q: How long does an LED lighting upgrade take?

Replacing a few fixtures with LED equivalents takes one to two hours. A larger project like under cabinet lighting for a full kitchen or converting an entire home’s fixtures typically takes half a day to a full day depending on the number of fixtures and wiring complexity.

Q: Do LED lights work with my existing dimmer switches?

Not always. Older dimmers designed for incandescent bulbs can cause LED fixtures to flicker, buzz, or not dim smoothly. LED-compatible dimmers are inexpensive and we typically replace them during the installation if needed. We test every fixture with its switch before finishing the job.

Q: What color temperature should I choose for LED lighting?

Most homeowners prefer 2700K (warm white) for living spaces, bedrooms, and dining areas. Kitchens and bathrooms often work well at 3000K (bright warm). Garages, workshops, and task areas benefit from 4000K to 5000K (cool white to daylight). We can help you choose the right temperature for each room based on how you use the space.

LED lighting installation replaces outdated incandescent, fluorescent, or halogen fixtures with energy-efficient LED alternatives that last longer and use a fraction of the electricity. For homeowners in Bastrop, TX, the most common projects are whole-room fixture upgrades, kitchen and bathroom lighting, under cabinet lighting, and retrofitting existing recessed cans with LED modules. All Communities handles LED installations for residential and commercial properties throughout the area.

Why Upgrade to LED Lighting?

LED technology has improved dramatically in the past decade. Modern LEDs produce warm, natural light that matches or exceeds the quality of the bulbs they replace. The practical advantages are significant:

LED bulbs use roughly 75% less energy than incandescent equivalents
Quality LED fixtures last 25,000 to 50,000 hours, compared to roughly 1,000 hours for incandescent bulbs
They produce very little heat, which reduces cooling load in summer
Dimmable LEDs work with compatible dimmer switches for adjustable light levels
They’re available in a wide range of color temperatures, from warm (2700K) to daylight (5000K)

Upgrading to LED lighting reduces your electricity usage for lighting immediately. For homes with a large number of fixtures, the savings are noticeable on the first utility bill after the switch.

LED Lighting Services We Provide

Light Fixture Installation and Replacement

Light fixture installation is the core of most LED upgrade projects. We remove existing fixtures and install new LED fixtures in their place, verifying that the wiring, junction box, and switch are compatible with the new unit. If your home has older dimmer switches that aren’t LED-compatible, we replace those at the same time to prevent flickering or buzzing.

Under Cabinet Lighting

Under cabinet lighting adds task lighting to kitchen countertops where overhead fixtures create shadows. LED under cabinet lights mount beneath upper cabinets and wire into a nearby circuit or plug into an outlet. Hardwired installations look cleaner and eliminate visible cords. All Communities runs the wiring behind the cabinets and connects to a dedicated switch so you can control the lights independently. This is one of the most requested lighting upgrades we handle in the Bastrop area.

LED Strip Lighting Installation

LED strip lighting installation uses flexible adhesive-backed LED strips for accent lighting in coves, under toe kicks, inside display shelving, or along architectural features. Strips require a low-voltage driver (transformer) and can be cut to length for precise fits. We wire the driver into your electrical system and position the strips for even, consistent light output. Poorly installed strip lighting shows hot spots, uneven brightness, and fails prematurely. We make sure the installation looks professional and lasts.

Recessed LED Retrofits

If your home has existing recessed can lights with older bulbs, LED retrofit modules drop into the existing housing and convert them to LED without replacing the entire fixture. This is one of the fastest and most cost-effective LED upgrades available. We verify housing compatibility, install the retrofit modules, and confirm dimmer compatibility.

How Much Does LED Lighting Installation Cost?

Cost depends on the scope of the project and whether new wiring is involved. The main factors:

Number of fixtures. More fixtures mean more labor, but per-fixture cost decreases with larger projects.
Fixture type. A simple one-for-one light fixture installation costs less than custom under cabinet lighting or LED strip runs that require new wiring and drivers.
Wiring condition. If existing wiring and switches are compatible with LED fixtures, the installation is straightforward. If wiring needs to be updated or new circuits added, that increases the scope.
Dimmer upgrades. Older dimmer switches designed for incandescent loads often need replacement to work properly with LED fixtures.

All Communities provides a clear estimate based on your specific project. We assess what you have, recommend what makes sense, and price the work honestly.

Can I Just Swap Bulbs Instead of Replacing Fixtures?

In many cases, yes. LED replacement bulbs that fit standard sockets are widely available and don’t require an electrician. But there are situations where a bulb swap isn’t enough. Fixtures with integrated ballasts (like older fluorescent troffers) need to be rewired or replaced entirely. Fixtures on incompatible dimmers will cause LED bulbs to flicker or buzz. And some older fixtures aren’t rated for the enclosed environment that LED bulbs perform best in.

If you’re unsure whether your fixtures are compatible with LED bulbs, All Communities can evaluate them and tell you which ones can take a simple bulb swap and which ones need full replacement. We won’t recommend replacing a fixture that just needs a new bulb.

Frequently Asked Questions

How long does an LED lighting upgrade take?

Do LED lights work with my existing dimmer switches?

Is it worth upgrading to LED in an older home in Bastrop?

Yes. Older homes often have the most to gain because they typically have more incandescent fixtures drawing more power. The energy savings are proportionally larger, and updating the fixtures improves both the quality of light and the safety of the electrical connections. If the existing wiring or junction boxes need attention, we address that during the installation.